Quality is left to be proven by time
Focus on R&D and customized production of mechanical parts
National consultation hotline:
158 1595 1688
The adjustable handle has been shaking for a long time, and it can't be locked even though it is in place. Most of them are not "broken". Troubleshoot the problem according to the three directions of the gear disc, thread, and mounting surface in turn, and you can locate the problem in ten minutes, and you can also judge whether it should be replaced.
The adjustable handle has been shaking for a long time, and it can't be locked even though it is in place. Most of them are not "broken". Troubleshoot the problem according to the three directions of the gear disc, thread, and mounting surface in turn, and you can locate the problem in ten minutes, and you can also judge whether it should be replaced.
The handwheel is gurgling, tight and loose, and stuck in a certain position, which may not be the problem of the handwheel itself. Press the matching gap, key and key groove, handwheel deformation, interference, and transmission side to check in turn, and you can quickly distinguish whether it is a handwheel or a repair equipment.
Drag chain cracking and chain dropping are two different types of problems: the former is mostly due to aging materials or insufficient bending radius, and the latter is mostly due to joints and fixed ends. In this paper, the respective judgment methods and criteria for the timing of replacement are given.
The position display (mechanical counter) has hop count, inaccurate reading, and incorrect return to zero, most of which are related to loose connection, pitch setting, or coaxiality of installation. Follow the steps to troubleshoot, most of the problems can be solved without changing parts.
The door locks of commercial steam ovens and hot air stoves are not tightly closed and leak air, usually due to wear of the lock tongue, sinking under the hinge or aging of the sealing strip. This article gives the judgment order and treatment method, and explains what type to select when replacing.
Whether the screw sliding teeth can be repaired depends on the location of the damage and the importance of the force. In most cases, "replacement" is more reliable than "trimming". This article explains the criteria, temporary emergency measures, and preventive measures.
The hinge of the cabinet, distribution box, and equipment protection door is loose and sagging, first determine whether the screw is loose, the hinge is worn, or the door plate is deformed. Most cases can be reinforced first, but insufficient load bearing belongs to the selection problem and can only be solved by changing the hinge.
Handpiece sleeve cracking is mostly aging or improper interference, slipping is mostly the size of the inner hole does not match. As long as three sizes are scaled before replacement, you can choose the right one at a time, without having to try again and again.
You can contact us by phone, WeChat or leave a message online to provide the required model, specifications and quantity. We will reply with quotation and selection suggestions as soon as possible.
Regular models maintain a certain amount of inventory, and spot goods can be shipped quickly; for large-volume or non-standard customized products, the delivery date is confirmed based on the model and quantity, and will be notified when quoting.
The bending radius should generally be greater than 7-10 times the maximum outer diameter of the accommodated cables/oil pipes, and a certain margin should be reserved; at the same time, a bridge type or fully enclosed structure should be selected based on the equipment stroke and installation space.
The position display is a mechanical counting display and does not require power supply. When installing, pay attention to the matching size and rotation direction of the shaft hole and the equipment shaft to ensure accurate positioning. If you need selection suggestions, the equipment shaft diameter and display digit requirements can be provided.
Can. The screw length and thread specifications (M4-M16) of bakelite and stainless steel handles can be customized according to drawings. Prototype development can be quickly done by providing drawings or samples.
First confirm whether the screw is screwed in place and whether the washer is missing; it is recommended to use an adjustable handle with toothed positioning for frequently adjusted parts, and check the locking torque regularly. You can also tell us your usage scenarios to help you match the appropriate model.
Send us your usage scenarios and needs to assist with selection and customization
留下需求，客服收到后第一时间联系您
客服已收到您的咨询，将尽快联系您
如需微信直聊，可再次发起咨询时点击「加微信直聊」
WeChat & WhatsApp Consultation
